BBRTF - S1184 CONDUCTIVE ADHESIVE #3032, PART B

  • MSDS: BBRTF
  • Manufacturer: RAYCHEM CORP
  • Product Name: S1184 CONDUCTIVE ADHESIVE #3032, PART B
  • National Stock Number: 8040-00F005107
Product Identification

Product ID:S1184 CONDUCTIVE ADHESIVE #3032, PART B
MSDS Date:01/01/1987
FSC:8040
NIIN:00F005107
MSDS Number: BBRTF

Responsible Party
RAYCHEM CORP/MENLO PARK, CA 94025

Emergency Phone: (415) 361-3333

Cage: FO008

Contractor
RAYCHEM CORP
MENLO PARK, CA 94025 US

Telephone: 650-361-4907

Cage: FO008

Ingredients

SILVER-FILLED REACTIVE POLYAMIDE CURING AGENT


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:IRRITANTS TO EYES AND SKIN. REPEATED OR
PROLONGED CONTACT MAY CAUSE A SENSITIZATION.

First Aid

First Aid:EYES: FLUSH WITH WATER; SEEK MEDICAL ATTENTION. SKIN: WASH
AFFECTED AREAS WITH SOAP & WATER. OCCASIONALLY INDIVIDUALS MAY
BECOME SENSITIZED. CONSULT A DOCTOR IF ALLERGIC SYMPTOMS DEVELOP.
INGESTION: C ONSULT A DOCTOR.

Fire Fighting

Flash Point:360F
Extinguishing Media:STANDARD (CO2, DRY POWDER, FOAM).
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IN
ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:TOXIC FUMES WILL BURN EVOLVED IN A FIRE.

Accidental Release

Spill Release Procedures:REMOVE WITH AN INERT ABSORBENT MATERIAL SUCH
AS A TISSUE OR SAND. CARE SHOULD TAKEN AVOID CONTACT WITH SKIN OR
EYES. CLEAN UP RESIDUE WITH SOAP AND WATER.

Handling

Handling and Storage Precautions:ALL CONTACT WITH EYES, SKIN AND MOUTH
MUST BE AVOIDED. AVOID BREATHING OF VAPORS. WASH HANDS TROUGHLY
BEFORE EATING, DRINKING OR SMOKING.
Other Precautions:STORE IN COOL DRY ENVIRONMENT.

Exposure Controls

Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:PREVENT CONTACT WITH SKIN OR EYES.
Supplemental Safety and Health
MSDS DATE: 04/85.

Chemical Properties

Spec Gravity:4-5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS SILVER GREY LIQ/SLIGHT HYDROCARBON ODOR
Percent Volatiles by Volume:2%

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES.
Hazardous Decomposition Products:DECOMP PRODUCTS ARE LIKELY TO BE
TOXIC/SHOULD NOT INHALED.

Disposal

Waste Disposal Methods:NORMAL METHODS BASED ON FEDERAL, STATE OR LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.